DIY Doctor- Fixing a Loose Door Handle with a New Linkage Clip

Introduction:

If your door handle has become loose and wobbly, it’s not only annoying but also a potential safety hazard. Instead of calling a professional handyman, empower yourself with this quick and easy DIY solution. We’ll guide you through the process of replacing the faulty linkage clip, restoring your door handle to its former glory.

Materials Required:

Phillips screwdriver

New linkage clip

Tweezers (optional)

Steps:

1. Remove the Door Handle:

Using a Phillips screwdriver, unscrew the two screws located on the inside edge of the door handle.

Pull the door handle straight towards you to detach it from the door.

2. Locate the Linkage Clip:

Inside the door cavity, behind the door handle opening, you’ll find a small metal clip attached to a linkage arm. This is the linkage clip that needs replacing.

3. Remove the Old Linkage Clip:

Using your fingernails or tweezers, gently pry the old linkage clip off the linkage arm. Be careful not to bend or damage the arm.

4. Attach the New Linkage Clip:

Align the new linkage clip with the linkage arm and carefully press it into place until it snaps into position.

5. Reattach the Door Handle:

Slide the door handle back onto the mounting plate, ensuring that the linkage clip engages with the handle’s post.

Tighten the two screws to secure the door handle firmly.

6. Test the Door Handle:

Jiggle and turn the door handle to check if it’s secure and operates smoothly.

Conclusion:

Replacing a loose door handle linkage clip is a simple and rewarding home repair that can save you time and money. By following these steps, you can restore your door handle’s functionality and maintain a safe and secure home. So, next time your door handle gives you trouble, don’t hesitate to channel your inner DIY doctor and get it fixed in a snap!