DIY Replacement- Steps for Replacing Curved Shower Door Rollers on Your Own

  • By:jumidata
  • 07-05-2024

Replacing curved shower door rollers might seem like a daunting task, but it’s actually a relatively straightforward DIY project that can save you a significant amount of money. Here’s a step-by-step guide to help you get the job done:

Required Tools and Materials

New curved shower door rollers


Tape measure



Utility knife

Step 1: Safety First

Before you begin, turn off the water supply to your shower and put on safety glasses. Make sure the shower door is secure and won’t move while you’re working.

Step 2: Remove the Old Rollers

Using a screwdriver, remove the screws that are holding the old rollers in place. Be careful not to drop the screws or get them in the way when you’re removing the rollers. Once the screws are removed, gently lift the rollers out of the tracks.

Step 3: Measure and Mark for the New Rollers

Use a tape measure to mark the location of the new rollers on the shower door. Make sure the rollers are evenly spaced and that they’re level. Use a pencil to mark the location of the screw holes.

Step 4: Install the New Rollers

Place the new rollers in the tracks and align them with the screw holes. Insert the screws and tighten them using a screwdriver. Make sure the rollers are securely in place and that they’re level.

Step 5: Reinstall the Shower Door

Once the new rollers are installed, carefully lift the shower door back into place. Make sure the rollers are aligned with the tracks and that the door opens and closes smoothly. If the door is not moving smoothly, adjust the screws on the rollers until you get the desired result.

Step 6: Finishing Touches

Use a utility knife to trim any excess caulk around the edges of the shower door. This will help to prevent leaks and keep your shower looking its best.


If you’re having trouble replacing the curved shower door rollers, here are a few troubleshooting tips:

Make sure the new rollers are the same size and shape as the old rollers.

Check that the rollers are installed in the correct orientation.

If the door is not moving smoothly, adjust the screws on the rollers until you get the desired result.

If you’re still having trouble, consult a professional plumber or handyman.

Tips for Maintaining Your Shower Door Rollers

To keep your shower door rollers in good working condition, follow these tips:

Clean the rollers regularly with a mild soap and water solution.

Lubricate the rollers periodically with a silicone-based lubricant.

Inspect the rollers for any signs of wear or damage. If you find any damage, replace the rollers immediately.

By following these steps, you can easily replace the curved shower door rollers on your own and save yourself a significant amount of money.



Zhaoqing Sateer Hardware Prodcuts Co., Ltd.

We are always providing our customers with reliable products and considerate services.

    If you would like to keep touch with us directly, please go to contact us


      Online Service